For analysis using CAD files, it will take 4-8 hours;For analysis using Gerber file, it will take 24-48 hours.
Please check the following standard lead time of fixture fabrication. If we can interact with each other during the development of PCB, it will shorten the time to fabricate the fixture.
***Functional Fixtures
***ICT & MDA Fixtures
Please click “file” and follow by “open file”, then select the *.brd file that is provided by Landrex. Then follow all instructions from the “help” pull down window.
Net Access Rate = Testable nets / Total nets Coverage Rate = Testable Components / Total ComponentsThe calculation methods are different, and yield different results.
We provide only Net Access Rate after analyzing CAD file. Coverage Rate can be calculated only after the test program is fully debugged.
Fabmaster
The receptacle height is depending on the type of test probe used, the fixture type and the component under tested. Generally, the receptacle height is defined based on the travel of the test probe. It is set to allow a 2/3 of full travel of the test probe.
For further details of ”Layout Rule” please contact our sales people.